Skip to main content
PrintCalc
3D Printers
Comparison

Anycubic Kobra X vs Bambu Lab A1: print cost head-to-head

Side-by-side specs, energy and amortization numbers for the Anycubic Kobra X and the Bambu Lab A1, plus a quick verdict on the dimensions that move per-part cost.

Specs side by side

Anycubic · 2025

Anycubic Kobra X

Price
$299
Average power
180 W
Useful life
18,000 h
Build volume
260 × 260 × 260 mm
Best for
Enthusiasts

Bambu Lab · 2024

Bambu Lab A1

Price
$399
Average power
130 W
Useful life
20,000 h
Build volume
256 × 256 × 256 mm
Best for
Enthusiasts

Sample calculation

Same input on both columns: 50 g PLA part, 6 h print time, 8% failure rate. Energy cost held at $0.18/kWh, amortization uses each printer's regional price — so both the machine and its price drive the numbers.

Anycubic Kobra X

  • Energy$0.19
  • Amortization$0.10
  • Unit Cost$1.51
  • Final Consumer Price$6.55

Bambu Lab A1

  • Energy$0.14
  • Amortization$0.12
  • Unit Cost$1.47
  • Final Consumer Price$6.39

Verdict by dimension

  • Cheaper to buy

    Anycubic Kobra X

    Anycubic Kobra X costs $299 vs $399 for the Bambu Lab A1 — a lower upfront price also means less amortization per print.

  • Cheaper to run

    Bambu Lab A1

    Bambu Lab A1 draws 130 W on average vs 180 W for the Anycubic Kobra X — lower power means a smaller energy line in every print.

  • Longer useful life

    Bambu Lab A1

    Bambu Lab A1 is rated at 20,000 h vs 18,000 h for the Anycubic Kobra X, so amortization spreads over more printing hours.

  • Larger build volume

    Tie

    Both printers land within the noise threshold for this dimension.

  • More recent release

    Anycubic Kobra X

    Anycubic Kobra X is from 2025 while the Bambu Lab A1 is from 2024 — more recent firmware, motion-system and ecosystem updates.

Both target Enthusiasts buyers, so the decision usually comes down to brand ecosystem and after-sale service.

Over a 5-year horizon, the Bambu Lab A1 amortizes 1.1× more print-hours than the Anycubic Kobra X.

Frequently asked questions

Is the Anycubic Kobra X better than the Bambu Lab A1?
Neither is strictly better — it depends on what you print. The Bambu Lab A1 is cheaper to run, the Anycubic Kobra X has the larger build volume, and the Anycubic Kobra X is the more recent release. Match the winner on the dimension you care about most.
What's the difference between the Anycubic Kobra X and the Bambu Lab A1?
The Anycubic Kobra X is priced at $299 with a 260 × 260 × 260 mm build volume; the Bambu Lab A1 is $399 with 256 × 256 × 256 mm. Beyond price and volume, they differ in power draw, rated life and release year — see the verdict table above.
Which is cheaper, the Anycubic Kobra X or the Bambu Lab A1?
The Anycubic Kobra X is cheaper to buy at $299 vs $399 for the Bambu Lab A1. Factoring energy and amortization, the Bambu Lab A1 also has the lower per-print running cost — run your own numbers in the calculator to be sure.

Related comparisons