Skip to main content
PrintCalc
3D Printers
Comparison

Anycubic Kobra S1 Max vs Sovol SV08: print cost head-to-head

Side-by-side specs, energy and amortization numbers for the Anycubic Kobra S1 Max and the Sovol SV08, plus a quick verdict on the dimensions that move per-part cost.

Specs side by side

Anycubic · 2025

Anycubic Kobra S1 Max

Price
$899
Average power
300 W
Useful life
22,000 h
Build volume
350 × 350 × 350 mm
Best for
Large format

Sovol · 2024

Sovol SV08

Price
$639
Average power
250 W
Useful life
25,000 h
Build volume
350 × 350 × 345 mm
Best for
Large format

Sample calculation

Same input on both columns: 50 g PLA part, 6 h print time, 8% failure rate. Energy cost held at $0.18/kWh, amortization uses each printer's regional price — so both the machine and its price drive the numbers.

Anycubic Kobra S1 Max

  • Energy$0.32
  • Amortization$0.25
  • Unit Cost$1.80
  • Final Consumer Price$7.84

Sovol SV08

  • Energy$0.27
  • Amortization$0.15
  • Unit Cost$1.65
  • Final Consumer Price$7.15

Verdict by dimension

  • Cheaper to buy

    Sovol SV08

    Sovol SV08 costs $639 vs $899 for the Anycubic Kobra S1 Max — a lower upfront price also means less amortization per print.

  • Cheaper to run

    Sovol SV08

    Sovol SV08 draws 250 W on average vs 300 W for the Anycubic Kobra S1 Max — lower power means a smaller energy line in every print.

  • Longer useful life

    Sovol SV08

    Sovol SV08 is rated at 25,000 h vs 22,000 h for the Anycubic Kobra S1 Max, so amortization spreads over more printing hours.

  • Larger build volume

    Tie

    Both printers land within the noise threshold for this dimension.

  • More recent release

    Anycubic Kobra S1 Max

    Anycubic Kobra S1 Max is from 2025 while the Sovol SV08 is from 2024 — more recent firmware, motion-system and ecosystem updates.

Both target Large format buyers, so the decision usually comes down to brand ecosystem and after-sale service.

Over a 5-year horizon, the Sovol SV08 amortizes 1.1× more print-hours than the Anycubic Kobra S1 Max.

Frequently asked questions

Is the Anycubic Kobra S1 Max better than the Sovol SV08?
Neither is strictly better — it depends on what you print. The Sovol SV08 is cheaper to run, the Anycubic Kobra S1 Max has the larger build volume, and the Anycubic Kobra S1 Max is the more recent release. Match the winner on the dimension you care about most.
What's the difference between the Anycubic Kobra S1 Max and the Sovol SV08?
The Anycubic Kobra S1 Max is priced at $899 with a 350 × 350 × 350 mm build volume; the Sovol SV08 is $639 with 350 × 350 × 345 mm. Beyond price and volume, they differ in power draw, rated life and release year — see the verdict table above.
Which is cheaper, the Anycubic Kobra S1 Max or the Sovol SV08?
The Sovol SV08 is cheaper to buy at $639 vs $899 for the Anycubic Kobra S1 Max. Factoring energy and amortization, the Sovol SV08 also has the lower per-print running cost — run your own numbers in the calculator to be sure.

Related comparisons