Skip to main content
PrintCalc
3D Printers
Comparison

Anycubic Kobra S1 Max vs Creality K2 Plus: print cost head-to-head

Side-by-side specs, energy and amortization numbers for the Anycubic Kobra S1 Max and the Creality K2 Plus, plus a quick verdict on the dimensions that move per-part cost.

Specs side by side

Anycubic · 2025

Anycubic Kobra S1 Max

Price
$899
Average power
300 W
Useful life
22,000 h
Build volume
350 × 350 × 350 mm
Best for
Large format

Creality · 2024

Creality K2 Plus

Price
$999
Average power
280 W
Useful life
25,000 h
Build volume
350 × 350 × 350 mm
Best for
Large format

Sample calculation

Same input on both columns: 50 g PLA part, 6 h print time, 8% failure rate. Energy cost held at $0.18/kWh, amortization uses each printer's regional price — so both the machine and its price drive the numbers.

Anycubic Kobra S1 Max

  • Energy$0.32
  • Amortization$0.25
  • Unit Cost$1.80
  • Final Consumer Price$7.84

Creality K2 Plus

  • Energy$0.30
  • Amortization$0.24
  • Unit Cost$1.77
  • Final Consumer Price$7.71

Verdict by dimension

  • Cheaper to buy

    Anycubic Kobra S1 Max

    Anycubic Kobra S1 Max costs $899 vs $999 for the Creality K2 Plus — a lower upfront price also means less amortization per print.

  • Cheaper to run

    Creality K2 Plus

    Creality K2 Plus draws 280 W on average vs 300 W for the Anycubic Kobra S1 Max — lower power means a smaller energy line in every print.

  • Longer useful life

    Creality K2 Plus

    Creality K2 Plus is rated at 25,000 h vs 22,000 h for the Anycubic Kobra S1 Max, so amortization spreads over more printing hours.

  • Larger build volume

    Tie

    Both printers land within the noise threshold for this dimension.

  • More recent release

    Anycubic Kobra S1 Max

    Anycubic Kobra S1 Max is from 2025 while the Creality K2 Plus is from 2024 — more recent firmware, motion-system and ecosystem updates.

Both target Large format buyers, so the decision usually comes down to brand ecosystem and after-sale service.

Over a 5-year horizon, the Creality K2 Plus amortizes 1.1× more print-hours than the Anycubic Kobra S1 Max.

Frequently asked questions

Is the Anycubic Kobra S1 Max better than the Creality K2 Plus?
Neither is strictly better — it depends on what you print. The Creality K2 Plus is cheaper to run, the Anycubic Kobra S1 Max has the larger build volume, and the Anycubic Kobra S1 Max is the more recent release. Match the winner on the dimension you care about most.
What's the difference between the Anycubic Kobra S1 Max and the Creality K2 Plus?
The Anycubic Kobra S1 Max is priced at $899 with a 350 × 350 × 350 mm build volume; the Creality K2 Plus is $999 with 350 × 350 × 350 mm. Beyond price and volume, they differ in power draw, rated life and release year — see the verdict table above.
Which is cheaper, the Anycubic Kobra S1 Max or the Creality K2 Plus?
The Anycubic Kobra S1 Max is cheaper to buy at $899 vs $999 for the Creality K2 Plus. Factoring energy and amortization, the Creality K2 Plus also has the lower per-print running cost — run your own numbers in the calculator to be sure.

Related comparisons