Bambu Lab · 2022
Print cost on the Bambu Lab P1P
The P1P is Bambu's open-frame CoreXY workhorse, hitting 500 mm/s on tuned profiles. It runs the same AMS-compatible firmware as its siblings but the open enclosure limits it on ABS and ASA. Best for fast PLA/PETG production.
Specs
- Average power
- 150 W
- Useful life
- 25,000 h
- Build volume
- 256 × 256 × 256 mm
- Best for
- Enthusiasts
Example calculation
For a 50 g part in PLA, 6 h print time and 8% failure rate. Currency follows your selection at the top.
- Filament$1.10
- Energy$0.16
- Amortization$0.12
- Failures (8%)$0.11
- Unit Cost$1.49
- Final Consumer Price (3× / 6% / 2%)$6.49
Filaments that print well on the Bambu Lab P1P
Every material the Bambu Lab P1P handles reliably, grouped by what makes it compatible. Click any to open the calculator with that filament selected.
Standard filaments
Everyday materials — the Bambu Lab P1P prints them stock without tuning or hardware mods.
Flexible filaments (direct drive)
Direct-drive extrusion on the Bambu Lab P1P gives flexible materials the control Bowden setups can't.