QIDI · 2026
Print cost on the QIDI Q2
The QIDI Q2 is an enclosed 270 × 270 × 256 mm CoreXY built for engineering materials: a 370 °C hotend and 65 °C actively heated chamber run Nylon, PC and PA-CF comfortably, not just at the edge. 600 mm/s, AI camera, 3-in-1 filtration. Base $549 (Q2C adds multicolor). QIDI's value-priced answer to the Bambu X1-Carbon on materials.
Specs
- Average power
- 250 W
- Useful life
- 25,000 h
- Build volume
- 270 × 270 × 256 mm
- Best for
- Professionals
When this printer makes sense
The QIDI Q2 is QIDI's follow-up to the Q1 Pro, built around engineering materials — a 370 °C hotend (the hottest in the catalog) and a 65 °C actively heated chamber that run Nylon, PC and carbon-fiber composites comfortably rather than at the edge. Enclosed 270 × 270 × 256 mm CoreXY, 600 mm/s, AI camera, 3-in-1 air filtration. Base $549, around R$ 3.199 in Brazil, with a Q2C combo variant for multicolor. Makes sense for anyone printing functional or engineering parts who wants X1-Carbon material range at a lower price.
Strengths and limitations
Strengths
370 °C hotend plus a 65 °C actively heated chamber — genuine PC/Nylon/PA-CF capability, not just PLA/PETG with a lid. 600 mm/s CoreXY at 20,000 mm/s². Full enclosure with 3-in-1 activated-carbon filtration for ABS/ASA fumes. AI camera with failure detection and timelapse. QIDI ships hardened parts and a solid slicer profile set. Undercuts the Bambu X1-Carbon and Prusa Core One on price for comparable material range.
Limitations
270 × 270 × 256 mm is competent but not large-format. Multicolor needs the Q2C variant (extra cost) and still purges like any single-nozzle system. QIDI's community and ecosystem are smaller than Bambu's, and its slicer (a fork) trails Bambu Studio in polish. The heated chamber and hot hotend draw more power — the energy line per print is higher than an open printer's. Great at engineering materials, but overkill (and overspend) if you only ever print PLA.
Typical print cost
A 150 g functional part in PA-CF runs about $3.50-4.50 per unit in a small batch on the Q2 (amortizing $549, the heated-chamber energy, ~8% failure, plus the abrasive-nozzle wear PA-CF causes). For engineering materials it's one of the cheapest ways to print them properly enclosed and hot — the Bambu X1-Carbon does similar work at nearly double the price. The trade: higher energy per print from the heated chamber, and multicolor costs extra (Q2C). Run your part in the calculator to see whether the engineering-grade capability pays off versus a cheaper open printer for your mix.
Cost by job type
Estimated cost to make and recommended sell price for common jobs on the QIDI Q2:
| Job | Material | Weight | Print time | Cost to make | Sell price |
|---|---|---|---|---|---|
| Small keychain | PLA | 5 g | 30 min | $0.15 | $0.67 |
| Miniature / figurine | PLA | 25 g | 2 h | $0.74 | $3.21 |
| Functional bracket | PETG | 80 g | 4 h | $2.45 | $10.65 |
| Large vase / planter | PLA | 200 g | 8 h | $5.33 | $23.18 |
| Flexible phone case | TPU | 40 g | 2h 30m | $1.48 | $6.42 |
| Enclosure / housing | ABS | 120 g | 5 h | $3.21 | $13.97 |
Assumptions: canonical filament prices, 8% failure rate, 3× markup, 6% tax, 2% payment fee. Currency follows your selection at the top.
Filaments that print well on the QIDI Q2
Every material the QIDI Q2 handles reliably, grouped by what makes it compatible. Click any to open the calculator with that filament selected.
Engineering materials (enclosure + high temp)
The QIDI Q2's enclosed chamber and high-temperature hotend handle the engineering filaments that need both.
Materials that need an enclosed chamber
The QIDI Q2's enclosed chamber prevents the warping that kills these materials on open frames.
Standard filaments
Everyday materials — the QIDI Q2 prints them stock without tuning or hardware mods.
Flexible filaments (direct drive)
Direct-drive extrusion on the QIDI Q2 gives flexible materials the control Bowden setups can't.
Compare the QIDI Q2 with...
QIDI Q2
QIDI · 2026
- Build volume
- 270 × 270 × 256 mm
- Average power
- 250 W
- Useful life
- 25,000 h
- Max hotend temp
- 370 °C
- Frame
- Enclosed
- Mechanism
- CoreXY
- Release year
- 2026
- Reference price
- $549