Skip to main content
PrintCalc
3D Printing Filaments
Filament showdown

ABS vs PETG: which filament should you use?

Per-kg price, temperatures, food contact and a worked cost example for the same part printed in ABS and PETG. Plus a verdict on the five dimensions that matter when picking between them.

Specs side by side

ABS

Typical price
~$22.00/kg
Print temperature
230–260 °C
Bed temperature
100–110 °C
Enclosed chamber
Recommended
Food-safe
No
Difficulty
★★★★☆

PETG

Typical price
~$25.00/kg
Print temperature
230–250 °C
Bed temperature
70–80 °C
Enclosed chamber
Optional
Food-safe
Yes
Difficulty
★★☆☆☆

Same part, different filament

50 g part, 6 h print time on a Bambu Lab A1 (the reference printer at 130 W) with 8% failure rate. Only the filament price changes between columns.

ABS

  • Filament$1.10
  • Energy$0.14
  • Unit Cost$1.50
  • Final Consumer Price$6.53

PETG

  • Filament$1.25
  • Energy$0.14
  • Unit Cost$1.66
  • Final Consumer Price$7.23

Verdict by dimension

  • Cheaper per kg

    ABS

    ABS averages $22.00/kg vs $25.00 for PETG — every gram you print costs less.

  • Easier to print

    PETG

    PETG is rated 2/5 difficulty vs 4/5 for ABS — fewer failed prints while you tune.

  • Lower print temperature

    Tie

    Both filaments land within the noise threshold for this dimension.

  • Open-frame friendly

    PETG

    PETG prints reliably without an enclosed chamber; ABS warps or cracks without one.

  • Food contact

    PETG

    PETG is rated Yes for food contact, while ABS is rated No.

Related comparisons